FRG-720/ FRG-730 - Agilent FRG-720/ FRG-730
Pro více informací, prosím, kontaktujte prodejce:
- Ing. Miloš Zavadil
- +420 736 473 658
- milos.zavadil@labtech.eu
Technická specifikace
| Measurement range (Air, O2, CO, N2) | 5 x 10-10 to 1000 mbar (3.8 x 10-10 to 760 Torr) | ||||
| Accuracy | 10-8 to 10-2 mbar/Torr – ±15% of reading | ||||
| Repeatability | 10-8 to 10-2 mbar/Torr – ±5% of reading | ||||
| Degas | p < 7.2 x 10-6 mbar – electron bombardment, max. 3 min | ||||
| Pressure, maximum | 2 bar absolute | ||||
| Temperature | Operation (ambient) | Storage | Bakeout at flange w/extension | Bakeout at flange wo/extension | Bakeout w/electroncs removed |
| 0 to 50 °C | –20 to +70 °C | 150 °C | 80 °C | 150 °C | |
| Supply voltage | 20 to 28 VDC, 1.4 A on startup for 200 msec, 0.8 A operating | ||||
| Output signal | analog 0 to 10 V | ||||
| Measurement range | 0.774 to 10.0 V | ||||
| Voltage vs. pressure | 0.75 V/decade | ||||
| Error signal | 0.3/0.5 V | ||||
| Minimum loaded impedance | 10 kΩ | ||||
| Communications interface | RS-232C | ||||
| Electrical connection | D-sub, 15 pin, male | ||||
| Maximum cable length | 100 m (330 ft) | ||||
| Materials exposed to vacuum | Yt2O3, Ir, Pt, Mo, Cu, W, NiFe, NiCr, stainless steel, glass | ||||
| Internal volume KF/CF | 24 cm3 (1.46 in3)/34 cm3 (2.1 in3) | ||||
| Weight KF/CF | 285 g/550 g | ||||
| Protection type | IP30 | ||||
| Setpoint relays (1) for FRG-730 | Range | Relay Contact | Hysteresis | Contact rating | |
| 1 x 10-9 to 100 mbar | n.o., potential free | 10 % of reading | 30 V/0.5 A DC | ||
| Profibus option | |||||
| Baud rates | 9.6/19.2/93.75/187.5/500 kBaud; 1.5/12 mBaud | ||||
| Address | 2 switches (address 00 – 127) or network programmable | ||||
| Digital functions | Read pressure, select units (Torr, mbar, Pa); degas function, Pirani full scale adjust; monitor gauge status; safe state allows definition of behavior in case of error; detailed alarm and warning information | ||||
| Analog functions | 0 to 10 V analog output pressure indication; two setpoint relays A + B | ||||
| Setpoint relays (2) | Range | Relay Contact | Hysteresis | Contact rating | |
| 1 x 10-9 to 100 mbar | n.o., potential free | 10 % of reading | 60 V/0.5 A DC | ||
| Connector for Profibus DP | D-sub, 9 pin, female | ||||
Fotogalerie
Máte dotaz?
LABTECH s.r.o © 2014, Pracoviště Telnice, K nádraží 191, Telnice 664 59, Tel: +420 511 192 927, Fax: +420 543 210 115, info@labtech.eu